Copper is a trace element present in small quantities in the seawater of reefs all around the world.

Copper is an essential trace element that kept in small concentrations has positive impacts on coral skeleton calcification, health and colouration along being needed for multiple biological processes of corals and other organisms.

It is important to check Copper levels through ICP analysis and ensure adequate levels and stability by dosing a Copper supplement as needed.

Naturally, Copper in seawater varies but its concentration doesn’t go above 3 µg/l.

On a scale of 1-10 (1 low, 10 high) we classify the importance of copper supplementation a 5 and suitable for experienced reefers only.

The use of our 2 part systems like Complete or pHplus will supplement copper helping to maintain adequate levels over time.

It is recommended to dose copper continuously (as needed) in as many small doses as possible. This will ensure Copper is present and available in the water (despite precipitation and potentially being below the ICP limit of detection).

Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less).

For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions.

The following Reef Zlements elements can be mixed with copper – barium, iron, chromium, cobalt, manganese, nickel and zinc.

Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products.

To reach the desired level of 0.20 µg/l please dose 0.03 ml of Reef Zlements Copper per day for 10 days.

Iodine is a trace element belonging to the halogen group, which is present in reefs all around the world, being one of the most important elements for all animals and plants in our aquariums.

It can be present in different organic and inorganic forms, however in our aquariums Iodine mainly exists as inorganic iodine, iodate, and iodide.

Nonetheless corals and bacteria can absorb all forms of iodine, and as such it is irrelevant in which form it is added.

Iodine concentrations in seawater vary widely, but it is commonly agreed that a level of 60-80 µg/l is ideal.

Iodine has been known to have a positive impact in aquariums where macro algae is present and to impact the blue and green colours of the genus Acropora and Montipora.

A low Iodine concentration manifests itself in poor colouration, reduced (or non-existent) growth, colourless growth tips or growth edges, and high light sensitivity allowing bleaching to more readily occur.

Low Iodine concentrations can also weaken the coral immune system, reducing any resistance to parasites.

Below ideal levels, Iodine will greatly impact bio-filtration and coral polyp extension is reduced (even when feeding LPS).

Very low levels of Iodine combined with low levels of other halogens such as Bromine can promote dinoflagellate growth.
With extreme iodine deficiency i.e. below 30 µg/l, SPS corals stop growing and RTN-STN infections occur more frequently.

With continued iodine deficiency, SPS corals start to STN from the base.

On a scale of 1-10 (1 low, 10 high) we classify the importance of Iodine supplementation a 9 and suitable for all levels of reefers.

The use of our 2 part systems like Complete or pHplus will supplement Iodine helping to maintain adequate levels over time.

For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions.

The following Reef Zlements elements can be mixed with iodine – fluorine, lithium, molybdenum, selenium and vanadium.

Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products.

To reach the desired level of 60.00 µg/l please dose 0.07 ml of Reef Zlements Iodine per day for 1 day.

Lithium is a metal that is present in reefs all around the world in substantially high quantities.

The effects of Lithium on animal and plant physiology are still to be researched but it is thought to be important for overall health.

On a scale of 1-10 (1 low, 10 high) we classify the importance of lithium supplementation a 4 and suitable for all levels of reefers.

The use of our 2 part systems like Complete or pHplus will supplement Lithium, helping to maintain adequate levels over time.

For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions.

The following Reef Zlements elements can be mixed with lithium – fluorine, iodine, molybdenum, selenium and vanadium.

Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products.

To reach the desired level of 200.00 µg/l please dose 5.13 ml of Reef Zlements Lithium per day for 3 days.

Nickel is present in reefs all around the world and is an essential element for many marine creatures and bacteria as it promotes many enzymatic processes to occur.

With the ideal Nickel concentration, improvements in growth along with red and turquoise colours and contrast.

Nonetheless, Nickel gets depleted from the water in our tanks quickly.

Nickel has a growth-enhancing effect if ideal Nitrate levels are found in the water.

On a scale of 1-10 (1 low, 10 high) we classify the importance of nickel supplementation a 3 and suitable for experienced reefers only.

The use of our 2 part systems like Complete or pHplus will help to maintain adequate levels over time.

It is recommended to dose Nickel continuously (as needed) in as many small doses as possible. This will ensure Nickel is present and available in the water (despite precipitation and potentially being below the ICP limit of detection).

Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less).

For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions.

The following Reef Zlements elements can be mixed with nickel – barium, chromium, cobalt, copper, iron, nickel and zinc.

Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products.

To reach the desired level of 2.50 µg/l please dose 0.13 ml of Reef Zlements Nickel per day for 30 days.

To reach the desired level of 150.00 µg/l please dose 2.66 ml of Reef Zlements Rubidium per day for 1 day.

If you have performed a water change recently to taking the ICP water sample, it is likely that the high Manganese value is related to the new saltwater. In this case, this value will quickly precipitate and reduce to normal levels.

Nonetheless, if it is maintained too high it will lead to the darkening of the corals and algae growth as well as the promotion of cyanobacteria growth.

To reduce it we recommend the use of a high quality GFO.

An ideal level of 2 µg/l is to be reached.

High concentrations of Vanadium are relatively benign. However, corals will grow higher numbers of zooxanthellae becoming darker. Increased algae growth may also be a consequence.

We therefore recommend you performing 6x 20% water changes with a good quality salt.

Zinc can be introduced into the aquarium via trace element supplements, frozen/dry food, nori or via rubbers, rusting equipment/metal in and around the aquarium. If levels are high, it is important to check for the source.

To lower high zinc concentrations from the aquarium use a high quality activated carbon like Reef Zlements activated carbon which you can find here and or perform 6x 20% water changes with a high quality salt.

Nitrate (NO3-) is a molecule that contains nitrogen and oxygen. In the context of a reef aquarium, nitrates are a byproduct of the nitrogen cycle, which is crucial for maintaining water quality and a healthy environment for the aquarium inhabitants, particularly in a reef aquarium.

Nitrates along with orthophosphate at ideal levels are considered important nutrients for corals, helping coral health and colouration. Idealy nitrates want to be kept below 25 in a 1:100 ratio to orthophosphate. With ideal levels and this ratio, the ideal NO3/PO4 conditions for coral health and algae control are achieved.

Nonetheless, if the nitrates are too high excessive bacteria (including cyanobacteria), undesireable algae can appear and corals tend to become darker so, it is important to maintain nitrates within the ideal range.

To keep nitrate levels in check, ensure that you use an adequately sized protein skimmer, employ efficient biological filtration, control feeding and waste accumulation in the tank. Additionally, you can add a refugium or algae reactor to the system.

To help both the biological filtration and macro algae we recommend the use of CarboPlus which you can find more information here

Orthophosphate (PO₄³⁻) is likely the most important nutrient in the reef aquaria when it comes to corals, however too much can lead to corals losing coral and becoming brown and to the reduction if coral growth.

It can also lead to algae and bacteria issues.

PO₄³⁻ swings can lead to STN/RTN so, it is important to carefully manage Phosphate levels.

To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients.

We recommend the use of our new high efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos.

Phosphorous is likely the most important nutrient in the reef aquaria when it comes to corals, however too much in the form of Orthophosphate can lead to corals losing colour, becoming brown and to the reduction of coral growth.

It can also lead to algae and bacterial issues.

Swings can lead to STN/RNT so, it is important to carefully manage Phosphorous/Phosphate levels.

To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients.

We recommend the use of our new high efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos.

Total Phosphate is the sum of all forms of phosphate present in a given sample. Phosphate (PO₄⁻) can exist in different chemical forms depending on factors such as pH, temperature, and the environment.

The three main forms of phosphate are:

• Orthophosphate (PO4³⁻) which is also measured with the Advanced ICP test, is also known as inorganic phosphate and is the most biologically available form of phosphate. It is directly used by corals, algae, bacteria and other organisms as a nutrient. Orthophosphate is the primary form of phosphate that aquarium hobbyists should focus on, as it has the most significant impact on the corals and the aquarium.
• Polyphosphates are composed of multiple phosphate molecules linked together. In water, they can break down into orthophosphate over time and become biologically available.
• Organic phosphates are phosphorus compounds bound to organic molecules, such as nucleic acids, phospholipids, and adenosine triphosphate (ATP). These compounds can also be contained in plants/algae, bacteria, detritus, etc. and are generally not readily available as a nutrient source for most aquatic organisms, as they need to be released into the water, broken down and converted into orthophosphate by biological processes before they can be utilized.

When measuring total phosphate via ICP testing, all these forms of phosphate are included in the analysis to get a comprehensive view of the total phosphorus content in a sample. This analysis is essential for understanding the nutrient dynamics and potential eutrophication (excessive nutrient enrichment leading to algal blooms) in aquatic environments, including in reef tanks.

For reef aquarium hobbyists, it’s often more critical to monitor and control orthophosphate levels since it is the primary form of phosphate that affects coral and algae growth in the tank.

High orthophosphate levels can lead to algae issues and negatively impact coral health, nonetheless reefers can likely infer the amount of detritus, plankton, bacteria and ultimately water quality level looking at the difference between the Total Phosphate and the Orthophosphate concentrations. The bigger the difference is the more likely is the presence of detritus, algae, bacteria, etc. in the water thus potentially reducing the water quality.

To resolve the above, reefers should use adequately sized skimmers, filter rollers like the Clarisea along with UV and Ozone systems which will help to remove these “detritus” from the water.

Following from the above a total phosphate concentration as close to the orthophosphate concentration as possible is likely a good indicator of a “clean water” free from detritus and other undesired bodies.

To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients.

If the Orthophosphate is equally high, we recommend the use of our new highly efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos.