ICP Analysis - Reef Zlements |
|||
| Tank Owner : Sue haddy | |||
| Tank Name : Sue\\'s reef | |||
| Tank Volume(Litres) : 850 | |||
|
|||
| Element | Analysis Value | Set Point | Desired Level | Compare Element | Element Health | ||
|---|---|---|---|---|---|---|---|
| Base Parameters | |||||||
| Alk | Alkalinity | 6.973 dKH | 6.2 - 8.5 dKH | 7.5 dKH | ▲ |
||
| pH | pH | 8.08 | 8.1 - 8.4 | 8.25 | ▲ |
Dose | |
| AB | Acid Binding Capacity | 2.490 mmol/L | 2.5 - 3.036 mmol/L | 2.7 mmol/L | ▲ |
Dose | |
| CaCO₃ | Calcium Carbonate Equivalent | 124.514 ppm | 121.6 - 152 ppm | 135 ppm | ▲ |
||
| Cond | Conductivity | 52.589 mS/cm | 49.676 - 53.738 mS/cm | 51.71 mS/cm | ▲ |
||
| Sal | Salinity | 34.65ppt | 33.00 - 35.00 ppt | 34 | ▲ |
||
| SG | Specific Gravity | 1.0262 sg | 1.0245 - 1.0268 sg | 1.0256 sg | ▲ |
||
| CLR | Colour | No | |||||
| SML | Smell | No | |||||
| Organics | |||||||
| SAC254 | Parameter available with MS ICP. | ||||||
| Macro Elements | |||||||
| B | Boron | 4.91 mg/l | 4 - 10 mg/l | 6 mg/l | ▲ |
||
| Br | Bromine | 76.35 mg/l | 62 - 100 mg/l | 70 mg/l | ▲ |
||
| Ca | Calcium | 401.31 mg/l | 380 - 500 mg/l | 420 mg/l | ▲ |
||
| Cl | Chloride | 19634.98 mg/l | 18200 - 20800 mg/l | 19500 mg/l | ▲ |
||
| F | Fluoride | 0.63 mg/l | 1.2 - 1.9 mg/l | 1.5 mg/l | ▲ |
Dose | |
| Mg | Magnesium | 1346.60 mg/l | 1350 - 1600 mg/l | 1400 mg/l | ▲ |
Dose | |
| K | Potassium | 419.02 mg/l | 390 - 500 mg/l | 425 mg/l | ▲ |
||
| Na | Sodium | 10821.19 mg/l | 10000 - 11300 mg/l | 10700 mg/l | ▲ |
||
| Sr | Strontium | 9.65 mg/l | 8 - 12 mg/l | 10 mg/l | ▲ |
||
| SO₄2- | Sulfate | 2586.05 mg/l | 2426 - 2963 mg/l | 2695 mg/l | ▲ |
||
| S | Sulphur | 873.16 mg/l | 810 - 990 mg/l | 900 mg/l | ▲ |
||
| Trace Element | |||||||
| Ba | Barium | < LOD | 10 - 100 µg/l | 15 µg/l | ▲ |
Dose | |
| Be | Beryllium | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| Cr | Chromium | < LOD | 0.2 - 1 µg/l | 0.5 µg/l | ▲ |
Dose | |
| Co | Cobalt | < LOD | 0.1 - 1 µg/l | 0.2 µg/l | ▲ |
Dose | |
| Cu | Copper | < LOD | 0.1 - 5 µg/l | 0.2 µg/l | ▲ |
Dose | |
| I | Iodine | 66.531 µg/l | 60 - 95 µg/l | 60 µg/l | ▲ |
||
| Fe | Iron | < LOD | 0.2 - 5 µg/l | 0.4 µg/l | ▲ |
Dose | |
| Li | Lithium | 206.659 µg/l | 180 - 500 µg/l | 200 µg/l | ▲ |
||
| Mn | Manganese | < LOD | 0.9 - 4 µg/l | 2 µg/l | ▲ |
Dose | |
| Mo | Molybdenum | 10.670 µg/l | 12 - 20 µg/l | 15 µg/l | ▲ |
Dose | |
| Ni | Nickel | 2.509 µg/l | 2 - 5 µg/l | 2.5 µg/l | ▲ |
||
| Se | Selenium | < LOD | 0.2 - 5 µg/l | 0.2 µg/l | ▲ |
Dose | |
| Si | Silicon | 78.482 µg/l | 0 - 600 µg/l | 200 µg/l | ▲ |
||
| Sn | Tin | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| V | Vanadium | < LOD | 0.5 - 5 µg/l | 2 µg/l | ▲ |
Dose | |
| Zn | Zinc | 7.086 µg/l | 3 - 12 µg/l | 5 µg/l | ▲ |
||
| Rb | Rubidium | Available with the ICP-MS test | |||||
| Nutrients | |||||||
| NO3 | Nitrate | 4.53 mg/l | 2 - 15 mg/l | 5 mg/l | ▲ |
||
| NO2 | Nitrite | 0.19 µg/l | 0 - 300 µg/l | 0 µg/l | ▲ |
||
| PO43- | Orthophosphate | 135.16 µg/l | 30 - 80 µg/l | 40 µg/l | ▲ |
Help | |
| P | Phosphorus | 65.52 µg/l | 7 - 27.5 µg/l | 13 µg/l | ▲ |
Help | |
| PO4 | Total Phosphate | 0.20 mg/l | 0.021 - 0.08 mg/l | 0.04 mg/l | ▲ |
Help | |
| Pollutants | |||||||
| Al | Aluminium | < LOD | 0 - 20 µg/l | 0 µg/l | ▲ |
||
| Sb | Antimony | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| As | Arsenic | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| Bi | Bismuth | < LOD | 0 - 0.2 µg/l | 0 µg/l | ▲ |
||
| Cd | Cadmium | < LOD | 0 - 1 µg/l | 0 µg/l | ▲ |
||
| Ge | Germanium | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| La | Lanthanum | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| Pb | Lead | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| Hg | Mercury | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| Ag | Silver | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| Tl | Thallium | < LOD | 0 - 2 µg/l | 0 µg/l | ▲ |
||
| Ti | Titanium | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| W | Tungsten | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| Zr | Zirconium | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| Dy | Dysprosium | Available with the ICP-MS test | |||||
| Er | Erbium | Available with the ICP-MS test | |||||
| Eu | Europium | Available with the ICP-MS test | |||||
| Gd | Gdolinium | Available with the ICP-MS test | |||||
| Ho | Holmium | Available with the ICP-MS test | |||||
| Nd | Neodymium | Available with the ICP-MS test | |||||
| Pr | Praseodymium | Available with the ICP-MS test | |||||
| Sm | Samarium | Available with the ICP-MS test | |||||
| Te | Tellurium | Available with the ICP-MS test | |||||
| Tb | Terbium | Available with the ICP-MS test | |||||
| Tm | Thulium | Available with the ICP-MS test | |||||
| Yb | Ytterbium | Available with the ICP-MS test | |||||
* < LOD is below limit of detection Back
| Element | Analysis Value | Set Point | Compare Element | Element Health | ||
|---|---|---|---|---|---|---|
| Base Parameters | ||||||
| pH | pH | 8.08 | 8.1 - 8.4 mg/l | ▲ |
||
|
pH (potential of hydrogen) is a crucial parameter in a reef aquarium due to its significant impact on the overall health and well-being of the aquatic ecosystem, particularly for the delicate and sensitive organisms that inhabit a reef environment, such as corals, fish, and invertebrates. Many reef-building corals and other calcifying organisms rely on the availability of calcium carbonate (CaCO3) to form their skeletons and structures. The rate of calcification is influenced by pH levels. Maintaining a stable and appropriate pH range ensures that corals have access to the necessary carbonate ions for efficient calcification. pH plays a role in various biological processes, including enzyme activity, metabolic rates, and nutrient uptake. Organisms in a reef aquarium have evolved to function optimally within a specific pH range. Fluctuations in pH can disrupt these processes and lead to stress or even death of those organisms. pH is closely tied to the balance between dissolved carbon dioxide (CO2), bicarbonate (HCO3-), and carbonate ions (CO32-) in the water. This carbonate equilibrium is essential for maintaining proper alkalinity levels. Alkalinity, in turn, helps stabilise pH by acting as a buffer, preventing rapid and harmful pH shifts. pH affects the ability of water to hold dissolved gases, including oxygen (O2) and carbon dioxide (CO2). Proper gas exchange is crucial for respiration in fish and other organisms. If pH is too low or too high, it can disrupt gas exchange and lead to oxygen stress or suffocation. pH influences the behavior and health of reef organisms. Fluctuations in pH can cause stress, alter feeding patterns, and lead to weakened immune systems, making organisms more susceptible to diseases. Low pH in a reef aquarium can be problematic for several reasons, as it can adversely affect the health and well-being of the inhabitants and disrupt the delicate balance of the aquatic ecosystem. Many reef-building corals rely on the availability of carbonate ions (CO32-) to build their skeletons and structures. Low pH levels can limit the availability of carbonate ions, hindering coral calcification and growth. This can lead to weakened and stunted coral growth, making the corals more vulnerable to environmental stressors and diseases. Low pH often corresponds to reduced bicarbonate (HCO3-) and carbonate (CO32-) ion concentrations, which are crucial components of the carbonate equilibrium and alkalinity. Alkalinity is essential for stabilizing pH and preventing rapid fluctuations. Inadequate alkalinity due to low pH can lead to pH swings that stress the inhabitants. Low pH can impact the ability of water to hold dissolved oxygen (O2) and release carbon dioxide (CO2). This can hinder proper respiration in fish and other aquatic organisms, potentially causing oxygen stress and suffocation. Low pH can contribute to stress-induced coral bleaching. When corals are stressed due to factors like high temperatures or poor water quality (including low pH), they expel the symbiotic algae (zooxanthellae) that provide them with nutrients and color. This results in the loss of color and energy reserves in the corals, making them more susceptible to mortality. Low pH levels can also potentially promote the growth of pathogens in a reef aquarium. Pathogens are microorganisms, such as bacteria, viruses, and fungi, that can cause diseases in aquatic organisms. When the pH of the water is too low, it can create conditions that are favorable for the proliferation of certain pathogens. The microbial communities present in a reef aquarium play a crucial role in maintaining water quality and preventing the growth of harmful pathogens. Low pH can disrupt the balance of these microbial communities, potentially allowing harmful pathogens to gain a foothold and multiply. Low pH can directly harm corals and other organisms. When corals are stressed by low pH, it can lead to tissue damage and openings in their protective layers. These openings can provide entry points for pathogens to infect the corals and cause diseases. To increase pH in your tank consider dosing our unique 2 part dosing pHplus which not only will provide all the needed Macro and Trace elements but will increase the pH in the aquarium. If pHplus isn’t enough consider the use of CarboZorb in a CO2 scrubber – CarboZorb is our CO2 absorbing media which will remove the CO2 going into the tank and will contribute to a higher pH. |
||||||
| AB | Acid Binding Capacity | 2.490 mmol/L | 2.5 - 3.036 ml | ▲ |
||
|
The acid binding capacity, also known as alkalinity or carbonate hardness, refers to the ability of the water in a reef aquarium to resist changes in pH when acids are added. It is a measure of the concentration of carbonate and bicarbonate ions (CO32- and HCO3-) in the water. These ions act as a buffer, helping to stabilize the pH of the water by neutralizing acids that may be introduced into the aquarium. In a reef aquarium, maintaining a stable pH is crucial for the health and well-being of the inhabitants, particularly corals, which are sensitive to pH fluctuations. Alkalinity is closely linked to the carbonate equilibrium in the water, and it plays a vital role in various biological processes, including coral calcification and the overall stability of the aquatic environment. Maintaining proper alkalinity levels ensures that the water can effectively buffer changes in pH, preventing rapid and potentially harmful fluctuations. It also supports the health and growth of corals and other reef organisms that depend on stable pH conditions for their physiological processes. Therefore, monitoring and adjusting alkalinity as needed is an essential aspect of reef aquarium maintenance. For dosing help please refer to the Alkalinity dosing section. |
||||||
| Macro Elements | ||||||
| F | Fluoride | 0.63 mg/l | 1.2 - 1.9 mg/l | ▲ |
||
|
Fluor is a naturally occurring chemical element that is commonly found in water sources, including seawater in the form of Fluoride (F-). Fluoride cannot be measured with an ICP technique and therefore requires a secondary test using Ion Chromatography or an Ion Selective Electrode. It is an element that like Iodine and Bromide belongs to the halogen group and performs an important role. In a reef aquarium, fluoride is generally present at low concentrations as it is in marine environments. The importance of fluoride in a reef aquarium lies in its potential role in coral health and skeletal formation. Some research suggests that fluoride may contribute to the structural integrity of coral skeletons by incorporating fluoride ions into the aragonite crystal lattice, which is the primary component of coral skeletons. This process is believed to increase the density and strength of the skeleton, making it more resistant to physical stress and predation. However, it’s essential to note that while fluoride may have a beneficial impact on coral skeletons, it is just one of many factors that contribute to overall coral health and growth. Fluoride levels are typically not a primary concern for most reef aquarium hobbyists however, values consistently below 1.2 mg/l will lead to poor colouration and growth, higher light sensitivity and less resistance to parasites. On a scale of 1-10 (1 low, 10 high) we classify the importance of Fluoride supplementation a 6 and suitable for all levels of reefers. To reach the desired level of 1.50 mg/l please dose 73.95 ml of Reef Zlements Fluoride per day for 5 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Mg | Magnesium | 1346.60 mg/l | 1350 - 1600 mg/l | ▲ |
||
|
Magnesium is a macro element which is extremely abundant in the reefs around the world. Magnesium is extremely important for the growth of various marine organisms including coralline algae. It assists with the formation of the skeleton of both corals and other animals and is involved in a variety of cellular processes such as cell division. Magnesium interacts with calcium and impacts upon calcium precipitation. Despite the ratio of magnesium consumption being much lower than calcium and carbonates, a lack of magnesium in the water will make achieving a stable calcium value difficult to achieve. At values of 1000 mg/l or below, growth is greatly reduced or halted, and it will be difficult to maintain a calcium level above 300 mg/l. Along with this, coral colouration will be highly impacted and LPS corals will start to die off. Whilst ICP testing is accurate, sudden fluctuations (more than +- 10 mg/l per day) of magnesium are uncommon in nature and should be avoided. Such fluctuations can be caused by poorly mixed sea salt components, or inaccurate water tests or measurement procedures. On a scale of 1-10 (1 low, 10 high) we classify the importance of Magnesium supplementation a 9 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Magnesium helping to maintain adequate levels over time. To reach the desired level of 1400.00 mg/l please dose 151.30 ml of Reef Zlements Magnesium per day for 3 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Trace Element | ||||||
| Ba | Barium | < LOD | 10 - 100 µg/l | ▲ |
||
|
Barium is an essential trace element present in reefs all around the world and plays a strong role in coral calcification supporting healthy coral growth. Barium levels in seawater vary widely between oceans and depth. While it is found in concentrations ranging from 5 to 20 µg/l, it is agreed that a 10 µg/l level is an acceptable concentration level to maintain in the saltwater aquarium. On a scale of 1-10 (1 low, 10 high) we classify the importance of Barium supplementation a 4 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Barium helping to maintain adequate levels over time. Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following elements can be mixed with barium – chromium, iron, cobalt, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 15.00 µg/l please dose 31.88 ml of Reef Zlements Barium per day for 4 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Cr | Chromium | < LOD | 0.2 - 1 µg/l | ▲ |
||
|
Chromium is a trace element present in small quantities in the seawater of reefs all around the world. Chromium is used to form enzymes for fat metabolisation in cells as such may have positive impacts on coral skeleton calcification, health and coloration. Chromium gets depleted from the water in our tanks quickly. Naturally, Chromium in seawater varies strongly and is usually between 0.2-0.6 µg/l. Too low chromium values lead to slow growth. Chromium plays an important role in the absorption and use of fatty acids in corals. On a scale of 1-10 (1 low, 10 high) we classify the importance of chromium supplementation a 4 and suitable for experienced reefers only. The use of our 2 part systems like Complete or pHplus will supplement Chromium helping to maintain adequate levels over time. It is recommended to dose Chromium continuously (as needed) in as many small doses as possible. This will ensure Chromium is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with chromium – barium, iron, cobalt, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.50 µg/l please dose 0.08 ml of Reef Zlements Chromium per day for 28 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Co | Cobalt | < LOD | 0.1 - 1 µg/l | ▲ |
||
|
Cobalt is a trace element present in a low concentration in oceans, varying between 0.002μg/L in north central Pacific Ocean and 0.39μg/L in Indian Ocean. Cobalt is an integral part of vitamin B12 and plays a fundamental role in DNA; cell processes along being a nutrient for macro algae. It has been suggested that Cobalt might be a limiting factor of the bio-availability in the oceans and therefore an important trace element for the life of our animals. Insufficient cobalt values reduce growth and colour formation. Due to the extremely small amount needed in our aquariums, Cobalt is usually below the ICP detection limit. Nonetheless, despite potentially being present in undetectable levels the correction to reference levels will be ideal. On a scale of 1-10 (1 low, 10 high) we classify the importance of cobalt supplementation a 4 and suitable for experienced reefers only. The use of our 2 part systems like Complete or pHplus will supplement cobalt helping to maintain adequate levels over time. It is recommended to dose Cobalt continuously (as needed) in as many small doses as possible. This will ensure Cobalt is present and available in the water (despite depletion and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with cobalt – barium, iron, chromium, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements. We cannot guarantee the safety of the mix with other products. To reach the desired level of 0.20 µg/l please dose 0.07 ml of Reef Zlements Cobalt per day for 12 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Cu | Copper | < LOD | 0.1 - 5 µg/l | ▲ |
||
|
Copper is a trace element present in small quantities in the seawater of reefs all around the world. Copper is an essential trace element that kept in small concentrations has positive impacts on coral skeleton calcification, health and colouration along being needed for multiple biological processes of corals and other organisms. It is important to check Copper levels through ICP analysis and ensure adequate levels and stability by dosing a Copper supplement as needed. Naturally, Copper in seawater varies but its concentration doesn’t go above 3 µg/l. On a scale of 1-10 (1 low, 10 high) we classify the importance of copper supplementation a 5 and suitable for experienced reefers only. The use of our 2 part systems like Complete or pHplus will supplement copper helping to maintain adequate levels over time. It is recommended to dose copper continuously (as needed) in as many small doses as possible. This will ensure Copper is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with copper – barium, iron, chromium, cobalt, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.20 µg/l please dose 0.09 ml of Reef Zlements Copper per day for 10 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Fe | Iron | < LOD | 0.2 - 5 µg/l | ▲ |
||
|
Iron is present in reefs all around the world, being one of the most important elements for all animals and plants in our aquariums. Having a strong role in many different metabolic processes, including the transport of oxygen in the blood of animals. Iron gets depleted (precipitates) from the water in our tanks very quickly. Iron has been known to have a positive impact in aquariums where macro algae is present and to improve green colours. It also plays an important role in the availability of nitrogen. A deficiency of Iron can result in corals and biofilms (bacteria) not being able to process nitrogen compounds as well, if at all. The reflection of this is that nutrients (NO3 and PO4) in the system increase substantially. Often Iron is a limiting factor in the nitrogen cycle and carbon dosing (CarboPlus) will not perform as expected in reducing PO₄³⁻ and NO3- due to a lack of Iron. A good Iron supplementation will improve the green and yellow colours in corals. Iron not only precipitates quickly but, is also removed by filtration and consumed quickly, it is recommended that the dose shown below is performed weekly by splitting in to as many doses as possible (ideally dosed more than once a day). On a scale of 1-10 (1 low, 10 high) we classify the importance of Iron supplementation a 7 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Iron helping to maintain adequate supplementation over time. It is recommended to dose Iron continuously (as needed) in as many small doses as possible. This will ensure Iron is present and available in the water (despite the quick depletion and potentially being below the ICP limit of detection). If you maintain macro algae please multiply your daily dose by 2x. However, if yellow corals do start to appear green, reduce the dose. Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with iron – barium, chromium, cobalt, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.40 µg/l please dose 0.06 ml of Reef Zlements Iron per day for 29 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Mn | Manganese | < LOD | 0.9 - 4 µg/l | ▲ |
||
|
Manganese is present in all reefs around the world, being an extremely important element for animals and plants in our aquariums. Being a cofactor to many enzymes it has a strong role in the metabolic processes of almost all organisms, Manganese has been known to have a positive impact around the oxidative processes in organisms and is an essential element for corals having an impact in both growth and colouration (specially red). Manganese in the aquarium precipitates quickly making it almost non-existent thus, can only be detected if the concentration is much higher than needed. A lack of manganese is visible in dull tissue, reduced growth (or none at all), colourless growth tips and little to no polyp extension in Goniopora and Alveopora corals as well as light sensitivity in LPS. Manganese also plays an important role in photosynthesis making it crucial for corals, algae and phytoplankton. On a scale of 1-10 (1 low, 10 high) we classify the importance of manganese supplementation an 8 and suitable for all levels of reefers. If GFO is used we recommend the additional supplementation of Manganese as GFO will absorb Mn. The use of our 2 part systems like Complete/pHplus or our NO3/PO4 reduction supplement CarboPlus will supplement Manganese helping to maintain adequate levels over time. It is recommended to dose Manganese daily and as in as many small doses as possible. This will ensure Manganese is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). If you maintain Goniopora corals, macro algae or a high coral bio-mass please multiply your daily dose by 2x. Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with manganese – barium, chromium, cobalt, copper, iron, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 2.00 µg/l please dose 0.25 ml of Reef Zlements Manganese per day for 34 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Mo | Molybdenum | 10.67 µg/l | 12 - 20 µg/l | ▲ |
||
|
Molybdenum is present in all reefs around the world and is an essential element for many marine creatures as it allows many enzymatic processes to occur, e.g. nitrate reductase and sulfite oxidase. It is a trace element that is not as abundant as lithium but is more abundant than other elements such as Manganese and Iron. Molybdenum is quite important for corals, inverts, and bacteria as it improves coral coloration and helps to regulate photo sensitivity, protects inverts from copper toxicity, and allows bacteria to perform the nitrate reductase. A deficiency of Molybdenum will lead to a reduction in growth and an increase in nutrient levels. On a scale of 1-10 (1 low, 10 high) we classify the importance of molybdenum supplementation an 8 and suitable for all levels of reefers. The use of our 2 part systems like Complete/pHplus or our CarboPlus nutrient reduction supplement will supplement Molybdenum helping to maintain adequate levels over time. For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with molybdenum – fluorine, iodine, lithium, selenium and vanadium. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 15.00 µg/l please dose 3.68 ml of Reef Zlements Molybdenum per day for 5 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Se | Selenium | < LOD | 0.2 - 5 µg/l | ▲ |
||
|
Selenium is a trace element present in small quantities in the seawater of reefs all around the world. Selenium is a very important trace element that kept in small concentrations has positive impacts on coral skeleton calcification, health and coloration along protecting the corals from oxidative compounds. To maximise its benefits Selenium should be used in conjunction with VitaPlus. It is recommended to dose Selenium continuously (as needed) in as many small doses as possible. This will ensure Selenium is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). On a scale of 1-10 (1 low, 10 high) we classify the importance of selenium supplementation a 5 and suitable for experienced reefers only. For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with selenium – fluorine, iodine, lithium, molybdenum and vanadium. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.20 µg/l please dose 0.07 ml of Reef Zlements Selenium per day for 12 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| V | Vanadium | < LOD | 0.5 - 5 µg/l | ▲ |
||
|
Vanadium is a metal present in reefs all around the world in different states of oxidation. It is an essential element for many marine creatures as it is an enzymatic cofactor, promoting many processes to occur in particular in the metabolism of cells. This transition metal is extremely important in colouration, growth of coral tissue along other organisms present in the aquarium. Vanadium is also deeply connected to nutrient export and without Vanadium this is highly impacted leading to high levels of Nitrate and Phosphate in the aquarium. In parallel it also leads dull colours without contrast our fluorescence. Vanadium gets depleted from the water in our tanks quickly, particularly in aquariums with a refugium as Vanadium helps algae to perform photosynthesis optimally. On a scale of 1-10 (1 low, 10 high) we classify the importance of vanadium supplementation an 8 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Vanadium helping to ensure a constant supply over time. Dosing CarboPlus will also supply the aquarium with Vanadium. It is recommended to dose Vanadium continuously (as needed) in as many small doses as possible. This will ensure Vanadium is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with vanadium – fluorine, iodine, lithium, molybdenum and selenium. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 2.00 µg/l please dose 0.08 ml of Reef Zlements Vanadium per day for 34 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Nutrients | ||||||
| Element | Analysis Value | Set Point | Element Health | ||||
|---|---|---|---|---|---|---|---|
| Base Parameters | |||||||
| Sal | Salinity | 34.65ppt | 33.00 - 35.00 ppt | ▲ |
|||
|
|
|||||||
| Macro Element | |||||||
| Trace Element | |||||||
| Nutrients | |||||||
| PO43- | Orthophosphate | 135.16 µg/l | 30 - 80 µg/l | ▲ |
|||
|
Orthophosphate (PO₄³⁻) is likely the most important nutrient in the reef aquaria when it comes to corals, however too much can lead to corals losing coral and becoming brown and to the reduction if coral growth. It can also lead to algae and bacteria issues. PO₄³⁻ swings can lead to STN/RTN so, it is important to carefully manage Phosphate levels. To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients. We recommend the use of our new high efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos. |
|||||||
| P | Phosphorus | 65.52 µg/l | 7 - 27.5 µg/l | ▲ |
|||
|
Phosphorous is likely the most important nutrient in the reef aquaria when it comes to corals, however too much in the form of Orthophosphate can lead to corals losing colour, becoming brown and to the reduction of coral growth. It can also lead to algae and bacterial issues. Swings can lead to STN/RNT so, it is important to carefully manage Phosphorous/Phosphate levels. To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients. We recommend the use of our new high efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos. |
|||||||
| P | Phosphate | 0.20 mg/l | 0.021 - 0.08 mg/l | ▲ |
|||
|
Total Phosphate is the sum of all forms of phosphate present in a given sample. Phosphate (PO₄⁻) can exist in different chemical forms depending on factors such as pH, temperature, and the environment. The three main forms of phosphate are:
When measuring total phosphate via ICP testing, all these forms of phosphate are included in the analysis to get a comprehensive view of the total phosphorus content in a sample. This analysis is essential for understanding the nutrient dynamics and potential eutrophication (excessive nutrient enrichment leading to algal blooms) in aquatic environments, including in reef tanks. For reef aquarium hobbyists, it’s often more critical to monitor and control orthophosphate levels since it is the primary form of phosphate that affects coral and algae growth in the tank. High orthophosphate levels can lead to algae issues and negatively impact coral health, nonetheless reefers can likely infer the amount of detritus, plankton, bacteria and ultimately water quality level looking at the difference between the Total Phosphate and the Orthophosphate concentrations. The bigger the difference is the more likely is the presence of detritus, algae, bacteria, etc. in the water thus potentially reducing the water quality. To resolve the above, reefers should use adequately sized skimmers, filter rollers like the Clarisea along with UV and Ozone systems which will help to remove these “detritus” from the water. Following from the above a total phosphate concentration as close to the orthophosphate concentration as possible is likely a good indicator of a “clean water” free from detritus and other undesired bodies. To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients. If the Orthophosphate is equally high, we recommend the use of our new highly efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos. |
|||||||
| Pollutants | |||||||
| Tank Name | Sue\\'s reef |
| Tank Volume | 850 |
| Download Report | Download Pdf |
Add Notes :
View Notes :
No Notes added.
Add Custom Set Pount(min -max values) for elements :
Analysis result
| Element | |
| Analysis Value | |
| Calculated Reference | |
| Result | |
