ICP Analysis - Reef Zlements |
|||
| Tank Owner : nathan.hayles@gmail.com | |||
| Tank Name : Aqua Reef Pro 900 | |||
| Tank Volume(Litres) : 250 | |||
|
|||
| Element | Analysis Value | Set Point | Desired Level | Compare Element | Element Health | ||
|---|---|---|---|---|---|---|---|
| Base Parameters | |||||||
| Alk | Alkalinity | 7.308 dKH | 6.2 - 8.5 dKH | 7.5 dKH | ▲ |
||
| pH | pH | 8.27 | 8.1 - 8.4 | 8.25 | ▲ |
||
| AB | Acid Binding Capacity | 2.610 mmol/L | 2.5 - 3.036 mmol/L | 2.7 mmol/L | ▲ |
||
| CaCO₃ | Calcium Carbonate Equivalent | 130.508 ppm | 121.6 - 152 ppm | 135 ppm | ▲ |
||
| Cond | Conductivity | 56.481 mS/cm | 49.676 - 53.738 mS/cm | 51.71 mS/cm | ▲ |
Help | |
| Sal | Salinity | 37.53ppt | 33.00 - 35.00 ppt | 34 | ▲ |
Help | |
| SG | Specific Gravity | 1.0285 sg | 1.0245 - 1.0268 sg | 1.0256 sg | ▲ |
Help | |
| CLR | Colour | No | |||||
| SML | Smell | No | |||||
| Organics | |||||||
| SAC254 | Parameter available with MS ICP. | ||||||
| Macro Elements | |||||||
| B | Boron | 4.83 mg/l | 4 - 10 mg/l | 6 mg/l | ▲ |
||
| Br | Bromine | 83.88 mg/l | 62 - 100 mg/l | 70 mg/l | ▲ |
||
| Ca | Calcium | 434.27 mg/l | 380 - 500 mg/l | 420 mg/l | ▲ |
||
| Cl | Chloride | 21157.20 mg/l | 18200 - 20800 mg/l | 19500 mg/l | ▲ |
Help | |
| F | Fluoride | 0.30 mg/l | 1.2 - 1.9 mg/l | 1.5 mg/l | ▲ |
Dose | |
| Mg | Magnesium | 1411.96 mg/l | 1350 - 1600 mg/l | 1400 mg/l | ▲ |
||
| K | Potassium | 445.77 mg/l | 390 - 500 mg/l | 425 mg/l | ▲ |
||
| Na | Sodium | 12048.77 mg/l | 10000 - 11300 mg/l | 10700 mg/l | ▲ |
Help | |
| Sr | Strontium | 10.06 mg/l | 8 - 12 mg/l | 10 mg/l | ▲ |
||
| SO₄2- | Sulfate | 2840.91 mg/l | 2426 - 2963 mg/l | 2695 mg/l | ▲ |
||
| S | Sulphur | 948.32 mg/l | 810 - 990 mg/l | 900 mg/l | ▲ |
||
| Trace Element | |||||||
| Ba | Barium | 14.198 µg/l | 10 - 100 µg/l | 15 µg/l | ▲ |
||
| Be | Beryllium | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| Cr | Chromium | < LOD | 0.2 - 1 µg/l | 0.5 µg/l | ▲ |
Dose | |
| Co | Cobalt | < LOD | 0.1 - 1 µg/l | 0.2 µg/l | ▲ |
Dose | |
| Cu | Copper | 0.830 µg/l | 0.1 - 5 µg/l | 0.2 µg/l | ▲ |
||
| I | Iodine | 102.532 µg/l | 60 - 95 µg/l | 60 µg/l | ▲ |
Help | |
| Fe | Iron | < LOD | 0.2 - 5 µg/l | 0.4 µg/l | ▲ |
Dose | |
| Li | Lithium | 204.512 µg/l | 180 - 500 µg/l | 200 µg/l | ▲ |
||
| Mn | Manganese | 1.855 µg/l | 0.9 - 4 µg/l | 2 µg/l | ▲ |
||
| Mo | Molybdenum | 12.802 µg/l | 12 - 20 µg/l | 15 µg/l | ▲ |
||
| Ni | Nickel | 1.391 µg/l | 2 - 5 µg/l | 2.5 µg/l | ▲ |
Dose | |
| Se | Selenium | < LOD | 0.2 - 5 µg/l | 0.2 µg/l | ▲ |
Dose | |
| Si | Silicon | 164.921 µg/l | 0 - 600 µg/l | 200 µg/l | ▲ |
||
| Sn | Tin | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| V | Vanadium | < LOD | 0.5 - 5 µg/l | 2 µg/l | ▲ |
Dose | |
| Zn | Zinc | 4.106 µg/l | 3 - 12 µg/l | 5 µg/l | ▲ |
||
| Rb | Rubidium | Available with the ICP-MS test | |||||
| Nutrients | |||||||
| NO3 | Nitrate | 12.00 mg/l | 2 - 15 mg/l | 5 mg/l | ▲ |
||
| NO2 | Nitrite | < LOD | 0 - 300 µg/l | 0 µg/l | ▲ |
||
| PO43- | Orthophosphate | 87.00 µg/l | 30 - 80 µg/l | 40 µg/l | ▲ |
Help | |
| P | Phosphorus | 30.29 µg/l | 7 - 27.5 µg/l | 13 µg/l | ▲ |
Help | |
| PO4 | Total Phosphate | 0.09 mg/l | 0.021 - 0.08 mg/l | 0.04 mg/l | ▲ |
Help | |
| Pollutants | |||||||
| Al | Aluminium | < LOD | 0 - 20 µg/l | 0 µg/l | ▲ |
||
| Sb | Antimony | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| As | Arsenic | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| Bi | Bismuth | < LOD | 0 - 0.2 µg/l | 0 µg/l | ▲ |
||
| Cd | Cadmium | < LOD | 0 - 1 µg/l | 0 µg/l | ▲ |
||
| Ge | Germanium | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| La | Lanthanum | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| Pb | Lead | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| Hg | Mercury | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| Sc | Scandium | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| Ag | Silver | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| Tl | Thallium | < LOD | 0 - 2 µg/l | 0 µg/l | ▲ |
||
| Ti | Titanium | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| W | Tungsten | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| Zr | Zirconium | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| Dy | Dysprosium | Available with the ICP-MS test | |||||
| Er | Erbium | Available with the ICP-MS test | |||||
| Eu | Europium | Available with the ICP-MS test | |||||
| Gd | Gdolinium | Available with the ICP-MS test | |||||
| Ho | Holmium | Available with the ICP-MS test | |||||
| Nd | Neodymium | Available with the ICP-MS test | |||||
| Pr | Praseodymium | Available with the ICP-MS test | |||||
| Sm | Samarium | Available with the ICP-MS test | |||||
| Te | Tellurium | Available with the ICP-MS test | |||||
| Tb | Terbium | Available with the ICP-MS test | |||||
| Tm | Thulium | Available with the ICP-MS test | |||||
| Yb | Ytterbium | Available with the ICP-MS test | |||||
* < LOD is below limit of detection Back
| Element | Analysis Value | Set Point | Compare Element | Element Health | ||
|---|---|---|---|---|---|---|
| Base Parameters | ||||||
| Macro Elements | ||||||
| F | Fluoride | 0.30 mg/l | 1.2 - 1.9 mg/l | ▲ |
||
|
Fluor is a naturally occurring chemical element that is commonly found in water sources, including seawater in the form of Fluoride (F-). Fluoride cannot be measured with an ICP technique and therefore requires a secondary test using Ion Chromatography or an Ion Selective Electrode. It is an element that like Iodine and Bromide belongs to the halogen group and performs an important role. In a reef aquarium, fluoride is generally present at low concentrations as it is in marine environments. The importance of fluoride in a reef aquarium lies in its potential role in coral health and skeletal formation. Some research suggests that fluoride may contribute to the structural integrity of coral skeletons by incorporating fluoride ions into the aragonite crystal lattice, which is the primary component of coral skeletons. This process is believed to increase the density and strength of the skeleton, making it more resistant to physical stress and predation. However, it’s essential to note that while fluoride may have a beneficial impact on coral skeletons, it is just one of many factors that contribute to overall coral health and growth. Fluoride levels are typically not a primary concern for most reef aquarium hobbyists however, values consistently below 1.2 mg/l will lead to poor colouration and growth, higher light sensitivity and less resistance to parasites. On a scale of 1-10 (1 low, 10 high) we classify the importance of Fluoride supplementation a 6 and suitable for all levels of reefers. To reach the desired level of 1.50 mg/l please dose 25.00 ml of Reef Zlements Fluoride per day for 6 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Trace Element | ||||||
| Cr | Chromium | < LOD | 0.2 - 1 µg/l | ▲ |
||
|
Chromium is a trace element present in small quantities in the seawater of reefs all around the world. Chromium is used to form enzymes for fat metabolisation in cells as such may have positive impacts on coral skeleton calcification, health and coloration. Chromium gets depleted from the water in our tanks quickly. Naturally, Chromium in seawater varies strongly and is usually between 0.2-0.6 µg/l. Too low chromium values lead to slow growth. Chromium plays an important role in the absorption and use of fatty acids in corals. On a scale of 1-10 (1 low, 10 high) we classify the importance of chromium supplementation a 4 and suitable for experienced reefers only. The use of our 2 part systems like Complete or pHplus will supplement Chromium helping to maintain adequate levels over time. It is recommended to dose Chromium continuously (as needed) in as many small doses as possible. This will ensure Chromium is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with chromium – barium, iron, cobalt, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.50 µg/l please dose 0.02 ml of Reef Zlements Chromium per day for 28 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Co | Cobalt | < LOD | 0.1 - 1 µg/l | ▲ |
||
|
Cobalt is a trace element present in a low concentration in oceans, varying between 0.002μg/L in north central Pacific Ocean and 0.39μg/L in Indian Ocean. Cobalt is an integral part of vitamin B12 and plays a fundamental role in DNA; cell processes along being a nutrient for macro algae. It has been suggested that Cobalt might be a limiting factor of the bio-availability in the oceans and therefore an important trace element for the life of our animals. Insufficient cobalt values reduce growth and colour formation. Due to the extremely small amount needed in our aquariums, Cobalt is usually below the ICP detection limit. Nonetheless, despite potentially being present in undetectable levels the correction to reference levels will be ideal. On a scale of 1-10 (1 low, 10 high) we classify the importance of cobalt supplementation a 4 and suitable for experienced reefers only. The use of our 2 part systems like Complete or pHplus will supplement cobalt helping to maintain adequate levels over time. It is recommended to dose Cobalt continuously (as needed) in as many small doses as possible. This will ensure Cobalt is present and available in the water (despite depletion and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with cobalt – barium, iron, chromium, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements. We cannot guarantee the safety of the mix with other products. To reach the desired level of 0.20 µg/l please dose 0.02 ml of Reef Zlements Cobalt per day for 12 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Fe | Iron | < LOD | 0.2 - 5 µg/l | ▲ |
||
|
Iron is present in reefs all around the world, being one of the most important elements for all animals and plants in our aquariums. Having a strong role in many different metabolic processes, including the transport of oxygen in the blood of animals. Iron gets depleted (precipitates) from the water in our tanks very quickly. Iron has been known to have a positive impact in aquariums where macro algae is present and to improve green colours. It also plays an important role in the availability of nitrogen. A deficiency of Iron can result in corals and biofilms (bacteria) not being able to process nitrogen compounds as well, if at all. The reflection of this is that nutrients (NO3 and PO4) in the system increase substantially. Often Iron is a limiting factor in the nitrogen cycle and carbon dosing (CarboPlus) will not perform as expected in reducing PO₄³⁻ and NO3- due to a lack of Iron. A good Iron supplementation will improve the green and yellow colours in corals. Iron not only precipitates quickly but, is also removed by filtration and consumed quickly, it is recommended that the dose shown below is performed weekly by splitting in to as many doses as possible (ideally dosed more than once a day). On a scale of 1-10 (1 low, 10 high) we classify the importance of Iron supplementation a 7 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Iron helping to maintain adequate supplementation over time. It is recommended to dose Iron continuously (as needed) in as many small doses as possible. This will ensure Iron is present and available in the water (despite the quick depletion and potentially being below the ICP limit of detection). If you maintain macro algae please multiply your daily dose by 2x. However, if yellow corals do start to appear green, reduce the dose. Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with iron – barium, chromium, cobalt, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.40 µg/l please dose 0.02 ml of Reef Zlements Iron per day for 29 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Ni | Nickel | 1.39 µg/l | 2 - 5 µg/l | ▲ |
||
|
Nickel is present in reefs all around the world and is an essential element for many marine creatures and bacteria as it promotes many enzymatic processes to occur. With the ideal Nickel concentration, improvements in growth along with red and turquoise colours and contrast. Nonetheless, Nickel gets depleted from the water in our tanks quickly. Nickel has a growth-enhancing effect if ideal Nitrate levels are found in the water. On a scale of 1-10 (1 low, 10 high) we classify the importance of nickel supplementation a 3 and suitable for experienced reefers only. The use of our 2 part systems like Complete or pHplus will help to maintain adequate levels over time. It is recommended to dose Nickel continuously (as needed) in as many small doses as possible. This will ensure Nickel is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with nickel – barium, chromium, cobalt, copper, iron, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 2.50 µg/l please dose 0.10 ml of Reef Zlements Nickel per day for 14 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Se | Selenium | < LOD | 0.2 - 5 µg/l | ▲ |
||
|
Selenium is a trace element present in small quantities in the seawater of reefs all around the world. Selenium is a very important trace element that kept in small concentrations has positive impacts on coral skeleton calcification, health and coloration along protecting the corals from oxidative compounds. To maximise its benefits Selenium should be used in conjunction with VitaPlus. It is recommended to dose Selenium continuously (as needed) in as many small doses as possible. This will ensure Selenium is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). On a scale of 1-10 (1 low, 10 high) we classify the importance of selenium supplementation a 5 and suitable for experienced reefers only. For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with selenium – fluorine, iodine, lithium, molybdenum and vanadium. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.20 µg/l please dose 0.02 ml of Reef Zlements Selenium per day for 12 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| V | Vanadium | < LOD | 0.5 - 5 µg/l | ▲ |
||
|
Vanadium is a metal present in reefs all around the world in different states of oxidation. It is an essential element for many marine creatures as it is an enzymatic cofactor, promoting many processes to occur in particular in the metabolism of cells. This transition metal is extremely important in colouration, growth of coral tissue along other organisms present in the aquarium. Vanadium is also deeply connected to nutrient export and without Vanadium this is highly impacted leading to high levels of Nitrate and Phosphate in the aquarium. In parallel it also leads dull colours without contrast our fluorescence. Vanadium gets depleted from the water in our tanks quickly, particularly in aquariums with a refugium as Vanadium helps algae to perform photosynthesis optimally. On a scale of 1-10 (1 low, 10 high) we classify the importance of vanadium supplementation an 8 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Vanadium helping to ensure a constant supply over time. Dosing CarboPlus will also supply the aquarium with Vanadium. It is recommended to dose Vanadium continuously (as needed) in as many small doses as possible. This will ensure Vanadium is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with vanadium – fluorine, iodine, lithium, molybdenum and selenium. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 2.00 µg/l please dose 0.02 ml of Reef Zlements Vanadium per day for 34 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Nutrients | ||||||
| Element | Analysis Value | Set Point | Element Health | ||||
|---|---|---|---|---|---|---|---|
| Base Parameters | |||||||
| Cond | Conductivity | 56.481 mS/cm | 49.676 - 53.738 mg/l | ▲ |
|||
|
|
|||||||
| SG | Specific Gravity | 1.0285 sg | 1.0245 - 1.0268 mg/l | ▲ |
|||
|
|
|||||||
| Macro Element | |||||||
| Cl | Chloride | 21157.20 mg/l | 18200 - 20800 mg/l | ▲ |
|||
|
Chloride is the most abundant salt in seawater and consequently is critical for the life of all habitants in the aquarium. Nonetheless, too high Chloride will result in high salinity which will lead poor or loss of coral colouration, slow/poor growth, small polyp extension and ultimately will lead to STN/RTN of corals. To lower chloride please remove enough saltwater from your tank and replace it by RODI water to get your salinity between 33-35 ppt. |
|||||||
| Na | Sodium | 12048.77 mg/l | 10000 - 11300 mg/l | ▲ |
|||
|
Sodium is one of the most important elements for animals and one that along chloride is found in higher concentration is seawater Nonetheless too much, corals will show reduced growth and little polyp extension, loss of colour and thinning of the tissue. Ensure your salinity is kept between 33–35 ppt for best Sodium levels, as such ensure you replenish evaporated water with pure reverse osmosis deionized (RODI) water and or remove saltwater replacing it by RODI Water. If sodium levels are out of balance we recommend 6x 20% water changes with high quality salt. |
|||||||
| Trace Element | |||||||
| I | Iodine | 102.532 µg/l | 60 - 95 µg/l | ▲ |
|||
|
High Iodine values will lead to darkening of the corals and increased algae growth. Nonetheless, a slow iodine level increase is quite benign and doesn’t seem to produce extreme issues. Nonetheless we recommend maintaining a level of Iodine between 60-80 µg/l. An overdose of iodine will manifest itself quickly in SPS corals as it will quickly lead to a decrease in colouration and a complete browning of the corals. Iodine overdoses are common and can be the result of dosing blindly, supplements containing it or some frozen foods. To lower high Iodine concentrations from the aquarium use a high quality activated carbon like Reef Zlements activated carbon which you can find here and or perform 6x 20% water changes with a high quality salt. |
|||||||
| Nutrients | |||||||
| PO43- | Orthophosphate | 87.00 µg/l | 30 - 80 µg/l | ▲ |
|||
|
Orthophosphate (PO₄³⁻) is likely the most important nutrient in the reef aquaria when it comes to corals, however too much can lead to corals losing coral and becoming brown and to the reduction if coral growth. It can also lead to algae and bacteria issues. PO₄³⁻ swings can lead to STN/RTN so, it is important to carefully manage Phosphate levels. To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients. We recommend the use of our new high efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos. |
|||||||
| P | Phosphorus | 30.29 µg/l | 7 - 27.5 µg/l | ▲ |
|||
|
Phosphorous is likely the most important nutrient in the reef aquaria when it comes to corals, however too much in the form of Orthophosphate can lead to corals losing colour, becoming brown and to the reduction of coral growth. It can also lead to algae and bacterial issues. Swings can lead to STN/RNT so, it is important to carefully manage Phosphorous/Phosphate levels. To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients. We recommend the use of our new high efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos. |
|||||||
| P | Phosphate | 0.09 mg/l | 0.021 - 0.08 mg/l | ▲ |
|||
|
Total Phosphate is the sum of all forms of phosphate present in a given sample. Phosphate (PO₄⁻) can exist in different chemical forms depending on factors such as pH, temperature, and the environment. The three main forms of phosphate are:
When measuring total phosphate via ICP testing, all these forms of phosphate are included in the analysis to get a comprehensive view of the total phosphorus content in a sample. This analysis is essential for understanding the nutrient dynamics and potential eutrophication (excessive nutrient enrichment leading to algal blooms) in aquatic environments, including in reef tanks. For reef aquarium hobbyists, it’s often more critical to monitor and control orthophosphate levels since it is the primary form of phosphate that affects coral and algae growth in the tank. High orthophosphate levels can lead to algae issues and negatively impact coral health, nonetheless reefers can likely infer the amount of detritus, plankton, bacteria and ultimately water quality level looking at the difference between the Total Phosphate and the Orthophosphate concentrations. The bigger the difference is the more likely is the presence of detritus, algae, bacteria, etc. in the water thus potentially reducing the water quality. To resolve the above, reefers should use adequately sized skimmers, filter rollers like the Clarisea along with UV and Ozone systems which will help to remove these “detritus” from the water. Following from the above a total phosphate concentration as close to the orthophosphate concentration as possible is likely a good indicator of a “clean water” free from detritus and other undesired bodies. To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients. If the Orthophosphate is equally high, we recommend the use of our new highly efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos. |
|||||||
| Pollutants | |||||||
| Tank Name | Aqua Reef Pro 900 |
| Tank Volume | 250 |
| Download Report | Download Pdf |
Add Notes :
View Notes :
No Notes added.
Add Custom Set Pount(min -max values) for elements :
Analysis result
| Element | |
| Analysis Value | |
| Calculated Reference | |
| Result | |
