ICP Analysis - Reef Zlements |
|||
| Tank Owner : adamcrisp | |||
| Tank Name : Adam\\'s Reef | |||
| Tank Volume(Litres) : 600 | |||
|
|||
| Element | Analysis Value | Set Point | Desired Level | Compare Element | Element Health | ||
|---|---|---|---|---|---|---|---|
| Base Parameters | |||||||
| Alk | Alkalinity | Parameter available with Advanced ICP. | |||||
| pH | pH | Parameter available with Advanced ICP. | |||||
| AB | Acid Binding Capacity | Parameter available with Advanced ICP. | |||||
| CaCO₃ | Calcium Carbonate Equivalent | Parameter available with Advanced ICP. | |||||
| Cond | Conductivity | Parameter available with Advanced ICP. | |||||
| Sal | Salinity | 35.28ppt | 33.00 - 35.00 ppt | ||||
| SG | Specific Gravity | Parameter available with Advanced ICP. | |||||
| CLR | Colour | Parameter available with Advanced ICP. | |||||
| SML | Smell | Parameter available with Advanced ICP. | |||||
| Organics | |||||||
| SAC254 | Parameter available with MS ICP. | ||||||
| Macro Elements | |||||||
| B | Boron | 5.10 mg/l | 4 - 10 mg/l | 6 mg/l | ▲ |
||
| Br | Bromine | 69.65 mg/l | 62 - 100 mg/l | 70 mg/l | ▲ |
||
| Ca | Calcium | 456.65 mg/l | 380 - 500 mg/l | 420 mg/l | ▲ |
||
| Cl | Chloride | 20456.96 mg/l | 18200 - 20800 mg/l | 19500 mg/l | ▲ |
||
| F | Fluoride | Parameter available with Advanced ICP. | |||||
| Mg | Magnesium | 1397.86 mg/l | 1350 - 1600 mg/l | 1400 mg/l | ▲ |
||
| K | Potassium | 428.82 mg/l | 390 - 500 mg/l | 425 mg/l | ▲ |
||
| Na | Sodium | 10592.97 mg/l | 10000 - 11300 mg/l | 10700 mg/l | ▲ |
||
| Sr | Strontium | 10.11 mg/l | 8 - 12 mg/l | 10 mg/l | ▲ |
||
| S | Sulphur | 895.26 mg/l | 810 - 990 mg/l | 900 mg/l | ▲ |
||
| Trace Element | |||||||
| Ba | Barium | 1.814 µg/l | 10 - 100 µg/l | 15 µg/l | ▲ |
Dose | |
| Be | Beryllium | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| Cr | Chromium | < LOD | 0.2 - 1 µg/l | 0.5 µg/l | ▲ |
Dose | |
| Co | Cobalt | 2.949 µg/l | 0.1 - 1 µg/l | 0.2 µg/l | ▲ |
Help | |
| Cu | Copper | 3.647 µg/l | 0.1 - 5 µg/l | 0.2 µg/l | ▲ |
||
| I | Iodine | 54.817 µg/l | 60 - 95 µg/l | 60 µg/l | ▲ |
Dose | |
| Fe | Iron | < LOD | 0.2 - 5 µg/l | 0.4 µg/l | ▲ |
Dose | |
| Li | Lithium | 195.281 µg/l | 180 - 500 µg/l | 200 µg/l | ▲ |
||
| Mn | Manganese | 1.097 µg/l | 0.9 - 4 µg/l | 2 µg/l | ▲ |
||
| Mo | Molybdenum | 6.683 µg/l | 12 - 20 µg/l | 15 µg/l | ▲ |
Dose | |
| Ni | Nickel | 2.260 µg/l | 2 - 5 µg/l | 2.5 µg/l | ▲ |
||
| Se | Selenium | < LOD | 0.2 - 5 µg/l | 0.2 µg/l | ▲ |
Dose | |
| Si | Silicon | 347.478 µg/l | 0 - 600 µg/l | 200 µg/l | ▲ |
||
| Sn | Tin | 4.479 µg/l | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| V | Vanadium | < LOD | 0.5 - 5 µg/l | 2 µg/l | ▲ |
Dose | |
| Zn | Zinc | < LOD | 3 - 12 µg/l | 5 µg/l | ▲ |
Dose | |
| Rb | Rubidium | Available with the ICP-MS test | |||||
| Nutrients | |||||||
| NO3 | Nitrate | Parameter available with Advanced ICP. | |||||
| NO2 | Nitrite | Parameter available with Advanced ICP. | |||||
| PO4 3- | Orthophosphate | Parameter available with Advanced ICP. | |||||
| P | Phosphorus | 33.44 µg/l | 7 - 27.5 µg/l | 13 µg/l | ▲ |
Help | |
| PO4 | Total Phosphate | 0.10 mg/l | 0.021 - 0.08 mg/l | 0.04 mg/l | ▲ |
Help | |
| Pollutants | |||||||
| Al | Aluminium | < LOD | 0 - 20 µg/l | 0 µg/l | ▲ |
||
| Sb | Antimony | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| As | Arsenic | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| Bi | Bismuth | < LOD | 0 - 0.2 µg/l | 0 µg/l | ▲ |
||
| Cd | Cadmium | < LOD | 0 - 1 µg/l | 0 µg/l | ▲ |
||
| Ge | Germanium | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| La | Lanthanum | < LOD | 0 - 10 µg/l | 0 µg/l | ▲ |
||
| Pb | Lead | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| Hg | Mercury | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| Ag | Silver | < LOD | 0 - 3 µg/l | 0 µg/l | ▲ |
||
| Tl | Thallium | < LOD | 0 - 2 µg/l | 0 µg/l | ▲ |
||
| Ti | Titanium | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| W | Tungsten | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| Zr | Zirconium | < LOD | 0 - 5 µg/l | 0 µg/l | ▲ |
||
| Dy | Dysprosium | Available with the ICP-MS test | |||||
| Er | Erbium | Available with the ICP-MS test | |||||
| Eu | Europium | Available with the ICP-MS test | |||||
| Gd | Gdolinium | Available with the ICP-MS test | |||||
| Ho | Holmium | Available with the ICP-MS test | |||||
| Nd | Neodymium | Available with the ICP-MS test | |||||
| Pr | Praseodymium | Available with the ICP-MS test | |||||
| Sm | Samarium | Available with the ICP-MS test | |||||
| Te | Tellurium | Available with the ICP-MS test | |||||
| Tb | Terbium | Available with the ICP-MS test | |||||
| Tm | Thulium | Available with the ICP-MS test | |||||
| Yb | Ytterbium | Available with the ICP-MS test | |||||
* < LOD is below limit of detection Back
| Element | Analysis Value | Set Point | Compare Element | Element Health | ||
|---|---|---|---|---|---|---|
| Base Parameters | ||||||
| Macro Elements | ||||||
| Trace Element | ||||||
| Ba | Barium | 1.81 µg/l | 10 - 100 µg/l | ▲ |
||
|
Barium is an essential trace element present in reefs all around the world and plays a strong role in coral calcification supporting healthy coral growth. Barium levels in seawater vary widely between oceans and depth. While it is found in concentrations ranging from 5 to 20 µg/l, it is agreed that a 10 µg/l level is an acceptable concentration level to maintain in the saltwater aquarium. On a scale of 1-10 (1 low, 10 high) we classify the importance of Barium supplementation a 4 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Barium helping to maintain adequate levels over time. Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following elements can be mixed with barium – chromium, iron, cobalt, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 15.00 µg/l please dose 19.79 ml of Reef Zlements Barium per day for 4 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Cr | Chromium | < LOD | 0.2 - 1 µg/l | ▲ |
||
|
Chromium is a trace element present in small quantities in the seawater of reefs all around the world. Chromium is used to form enzymes for fat metabolisation in cells as such may have positive impacts on coral skeleton calcification, health and coloration. Chromium gets depleted from the water in our tanks quickly. Naturally, Chromium in seawater varies strongly and is usually between 0.2-0.6 µg/l. Too low chromium values lead to slow growth. Chromium plays an important role in the absorption and use of fatty acids in corals. On a scale of 1-10 (1 low, 10 high) we classify the importance of chromium supplementation a 4 and suitable for experienced reefers only. The use of our 2 part systems like Complete or pHplus will supplement Chromium helping to maintain adequate levels over time. It is recommended to dose Chromium continuously (as needed) in as many small doses as possible. This will ensure Chromium is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with chromium – barium, iron, cobalt, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.50 µg/l please dose 0.05 ml of Reef Zlements Chromium per day for 28 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| I | Iodine | 54.82 µg/l | 60 - 95 µg/l | ▲ |
||
|
Iodine is a trace element belonging to the halogen group, which is present in reefs all around the world, being one of the most important elements for all animals and plants in our aquariums. It can be present in different organic and inorganic forms, however in our aquariums Iodine mainly exists as inorganic iodine, iodate, and iodide. Nonetheless corals and bacteria can absorb all forms of iodine, and as such it is irrelevant in which form it is added. Iodine concentrations in seawater vary widely, but it is commonly agreed that a level of 60-80 µg/l is ideal. Iodine has been known to have a positive impact in aquariums where macro algae is present and to impact the blue and green colours of the genus Acropora and Montipora. A low Iodine concentration manifests itself in poor colouration, reduced (or non-existent) growth, colourless growth tips or growth edges, and high light sensitivity allowing bleaching to more readily occur. Low Iodine concentrations can also weaken the coral immune system, reducing any resistance to parasites. Below ideal levels, Iodine will greatly impact bio-filtration and coral polyp extension is reduced (even when feeding LPS). Very low levels of Iodine combined with low levels of other halogens such as Bromine can promote dinoflagellate growth. With continued iodine deficiency, SPS corals start to STN from the base. On a scale of 1-10 (1 low, 10 high) we classify the importance of Iodine supplementation a 9 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Iodine helping to maintain adequate levels over time. For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with iodine – fluorine, lithium, molybdenum, selenium and vanadium. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 60.00 µg/l please dose 0.31 ml of Reef Zlements Iodine per day for 1 day. |
Dosing Diary Total dosed 0.31 ml |
|||||
| Fe | Iron | < LOD | 0.2 - 5 µg/l | ▲ |
||
|
Iron is present in reefs all around the world, being one of the most important elements for all animals and plants in our aquariums. Having a strong role in many different metabolic processes, including the transport of oxygen in the blood of animals. Iron gets depleted (precipitates) from the water in our tanks very quickly. Iron has been known to have a positive impact in aquariums where macro algae is present and to improve green colours. It also plays an important role in the availability of nitrogen. A deficiency of Iron can result in corals and biofilms (bacteria) not being able to process nitrogen compounds as well, if at all. The reflection of this is that nutrients (NO3 and PO4) in the system increase substantially. Often Iron is a limiting factor in the nitrogen cycle and carbon dosing (CarboPlus) will not perform as expected in reducing PO₄³⁻ and NO3- due to a lack of Iron. A good Iron supplementation will improve the green and yellow colours in corals. Iron not only precipitates quickly but, is also removed by filtration and consumed quickly, it is recommended that the dose shown below is performed weekly by splitting in to as many doses as possible (ideally dosed more than once a day). On a scale of 1-10 (1 low, 10 high) we classify the importance of Iron supplementation a 7 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Iron helping to maintain adequate supplementation over time. It is recommended to dose Iron continuously (as needed) in as many small doses as possible. This will ensure Iron is present and available in the water (despite the quick depletion and potentially being below the ICP limit of detection). If you maintain macro algae please multiply your daily dose by 2x. However, if yellow corals do start to appear green, reduce the dose. Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with iron – barium, chromium, cobalt, copper, manganese, nickel and zinc. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.40 µg/l please dose 0.04 ml of Reef Zlements Iron per day for 29 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Mo | Molybdenum | 6.68 µg/l | 12 - 20 µg/l | ▲ |
||
|
Molybdenum is present in all reefs around the world and is an essential element for many marine creatures as it allows many enzymatic processes to occur, e.g. nitrate reductase and sulfite oxidase. It is a trace element that is not as abundant as lithium but is more abundant than other elements such as Manganese and Iron. Molybdenum is quite important for corals, inverts, and bacteria as it improves coral coloration and helps to regulate photo sensitivity, protects inverts from copper toxicity, and allows bacteria to perform the nitrate reductase. A deficiency of Molybdenum will lead to a reduction in growth and an increase in nutrient levels. On a scale of 1-10 (1 low, 10 high) we classify the importance of molybdenum supplementation an 8 and suitable for all levels of reefers. The use of our 2 part systems like Complete/pHplus or our CarboPlus nutrient reduction supplement will supplement Molybdenum helping to maintain adequate levels over time. For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with molybdenum – fluorine, iodine, lithium, selenium and vanadium. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 15.00 µg/l please dose 2.77 ml of Reef Zlements Molybdenum per day for 9 days. |
Dosing Diary Total dosed 22.19 ml |
|||||
| Se | Selenium | < LOD | 0.2 - 5 µg/l | ▲ |
||
|
Selenium is a trace element present in small quantities in the seawater of reefs all around the world. Selenium is a very important trace element that kept in small concentrations has positive impacts on coral skeleton calcification, health and coloration along protecting the corals from oxidative compounds. To maximise its benefits Selenium should be used in conjunction with VitaPlus. It is recommended to dose Selenium continuously (as needed) in as many small doses as possible. This will ensure Selenium is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). On a scale of 1-10 (1 low, 10 high) we classify the importance of selenium supplementation a 5 and suitable for experienced reefers only. For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with selenium – fluorine, iodine, lithium, molybdenum and vanadium. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 0.20 µg/l please dose 0.05 ml of Reef Zlements Selenium per day for 12 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| V | Vanadium | < LOD | 0.5 - 5 µg/l | ▲ |
||
|
Vanadium is a metal present in reefs all around the world in different states of oxidation. It is an essential element for many marine creatures as it is an enzymatic cofactor, promoting many processes to occur in particular in the metabolism of cells. This transition metal is extremely important in colouration, growth of coral tissue along other organisms present in the aquarium. Vanadium is also deeply connected to nutrient export and without Vanadium this is highly impacted leading to high levels of Nitrate and Phosphate in the aquarium. In parallel it also leads dull colours without contrast our fluorescence. Vanadium gets depleted from the water in our tanks quickly, particularly in aquariums with a refugium as Vanadium helps algae to perform photosynthesis optimally. On a scale of 1-10 (1 low, 10 high) we classify the importance of vanadium supplementation an 8 and suitable for all levels of reefers. The use of our 2 part systems like Complete or pHplus will supplement Vanadium helping to ensure a constant supply over time. Dosing CarboPlus will also supply the aquarium with Vanadium. It is recommended to dose Vanadium continuously (as needed) in as many small doses as possible. This will ensure Vanadium is present and available in the water (despite precipitation and potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with vanadium – fluorine, iodine, lithium, molybdenum and selenium. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 2.00 µg/l please dose 0.06 ml of Reef Zlements Vanadium per day for 34 days. |
Dosing Diary Total dosed 0.00 ml |
|||||
| Zn | Zinc | < LOD | 3 - 12 µg/l | ▲ |
||
|
Zinc is a trace element present in reefs all around the world and is one of the most important elements for all animals and plants in our aquariums as it is involved in many metabolic and cellular processes. Zinc concentrations in seawater normally vary between 0.6-5 µg/l, however, Zinc gets depleted from the water in our tanks very quickly. Low Zinc concentrations will impair coral growth and render corals more sensitive to light and bleaching. The nutrient cycle is also impacted and the bio-export of NO3 and PO4 is significantly reduced. On a scale of 1-10 (1 low, 10 high) we classify the importance of zinc supplementation a 4 and suitable for experienced reefers. The use of our 2 part systems like Complete or pHplus will help to maintain adequate levels over time. It is recommended to dose Zinc continuously (as needed) in as many small doses as possible. This will ensure Zinc is present and available in the water (despite potentially being below the ICP limit of detection). Please note that for reference one drop is approximately 0.02-0.05 ml. If your recommended dose is below 1 drop per day, feel free to dose every other day (or less). For ease of dosing and if you wish you can dose our elements via a dosing pump mixing them together in 2 solutions. The following Reef Zlements elements can be mixed with zinc – barium, chromium, cobalt, copper, iron, manganese and nickel. Please note that given the different products available in the market the above only applies to Reef Zlements trace elements and that we cannot guarantee the safety of the mix with other products. To reach the desired level of 5.00 µg/l please dose 0.60 ml of Reef Zlements Zinc per day for 25 days. |
Dosing Diary Total dosed 4.80 ml |
|||||
| Nutrients | ||||||
| Element | Analysis Value | Set Point | Element Health | ||||
|---|---|---|---|---|---|---|---|
| Base Parameters | |||||||
| Macro Element | |||||||
| Trace Element | |||||||
| Co | Cobalt | 2.949 µg/l | 0.1 - 1 µg/l | ▲ |
|||
|
Cobalt is a trace element present in a low concentration in oceans, varying between 0.002μg/L in north central Pacific Ocean and 0.39μg/L in Indian Ocean. Above these values will promote the increase of cyanobacteria and the darkening of corals. We therefore recommend you to perform 6x 20% water changes with a high quality salt and if coral/fish vitamin supplements are used we recommend the immediate discontinuing of these as this can contain cobalt. |
|||||||
| Nutrients | |||||||
| P | Phosphorus | 33.44 µg/l | 7 - 27.5 µg/l | ▲ |
|||
|
Phosphorous is likely the most important nutrient in the reef aquaria when it comes to corals, however too much in the form of Orthophosphate can lead to corals losing colour, becoming brown and to the reduction of coral growth. It can also lead to algae and bacterial issues. Swings can lead to STN/RNT so, it is important to carefully manage Phosphorous/Phosphate levels. To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients. We recommend the use of our new high efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos. |
|||||||
| P | Phosphate | 0.10 mg/l | 0.021 - 0.08 mg/l | ▲ |
|||
|
Total Phosphate is the sum of all forms of phosphate present in a given sample. Phosphate (PO₄⁻) can exist in different chemical forms depending on factors such as pH, temperature, and the environment. The three main forms of phosphate are:
When measuring total phosphate via ICP testing, all these forms of phosphate are included in the analysis to get a comprehensive view of the total phosphorus content in a sample. This analysis is essential for understanding the nutrient dynamics and potential eutrophication (excessive nutrient enrichment leading to algal blooms) in aquatic environments, including in reef tanks. For reef aquarium hobbyists, it’s often more critical to monitor and control orthophosphate levels since it is the primary form of phosphate that affects coral and algae growth in the tank. High orthophosphate levels can lead to algae issues and negatively impact coral health, nonetheless reefers can likely infer the amount of detritus, plankton, bacteria and ultimately water quality level looking at the difference between the Total Phosphate and the Orthophosphate concentrations. The bigger the difference is the more likely is the presence of detritus, algae, bacteria, etc. in the water thus potentially reducing the water quality. To resolve the above, reefers should use adequately sized skimmers, filter rollers like the Clarisea along with UV and Ozone systems which will help to remove these “detritus” from the water. Following from the above a total phosphate concentration as close to the orthophosphate concentration as possible is likely a good indicator of a “clean water” free from detritus and other undesired bodies. To manage PO4 adequately, a conscious fish load and feeding should be observed, this will in turn help avoiding the deposits of organic matter containing undesired excess of nutrients. If the Orthophosphate is equally high, we recommend the use of our new highly efficient liquid Phosphate remover PhosFate or a good quality Granular Ferric Oxide (GFO) like RowaPhos. |
|||||||
| Pollutants | |||||||
| Tank Name | Adam\\'s Reef |
| Tank Volume | 600 |
| Download Report | Download Pdf |
Add Notes :
View Notes :
No Notes added.
Add Custom Set Pount(min -max values) for elements :
Analysis result
| Element | |
| Analysis Value | |
| Calculated Reference | |
| Result | |
